New Beetle L4-2.0L (AVH) (2005)
/Page-2445006.png)
-
Pull switch out of instrument panel - arrow C - and disconnect harness connectors.
-
Unclip switch - 2 - for headlight range control and disconnect connector.
-
Remove four bolts - 1 -.
-
Unclip upper trim on drivers side - 2 - and remove from instrument panel.
-
Remove six bolts - 2 -.
-
Remove baffle plate - 1 - (convertible).
-
Remove air duct - 1 - above center of instrument panel.
-
Remove three bolts - 1 -.
