New Beetle L4-2.0L (AVH) (2005)
^
Loosen the left and right top locks (T-30 bolts) enough to allow lock movement, -arrows-. DO NOT remove bolts.
^
Latch and unlatch the top a few times to center top locks.
^
Latch top.
The right top lock is the reference point and must be tightened first.
After securing the top locks, recheck top alignment.
Tip:
Top locks may have to be adjusted again for final fit.
^
Tighten (4) T-30 top lock bolts. Torque = 10 Nm (89 in-lbs).
^
Recheck top closing/latching effort.
If top is not parallel to roof crossmember
Note:
DO NOT adjust the stop cables unless it is absolutely necessary.
Note:
When top is in closing transition, top latches MUST NOT hit top locks.
^
Verify top latching effort.
When completed, convertible top must be seated centrally on roof crossmember and evenly on the A-pillar.
Warranty
Please review both warranty tables prior to Claim submittal
^
Table 1: Convertible Top, Hard to Close
^
Table 2: Convertible Top, Hard to Latch