New Beetle L4-2.0L (AVH) (2005)
Convertible Top Latch: Service and Repair
Rear Catch - Electro/Hydraulic, Assembly Overview
Convertible Top Rear Catch - Electro/Hydraulic, Assembly Overview
1. Convertible top catch
-
Removing:
-
Remove side trim panel.
-
Open convertible top or work from inside of vehicle with top closed.
-
Disconnect electrical connector - 6 -.
-
Remove bolts/screws - 3 -.
-
Installing:
-
Install bolt/screw - 3 - and tighten lightly.
-
Connect electrical connector - 6 -.
-
Align module for convertible top catch.
-
Close convertible top if decided to open it previously.
-
When convertible top has engaged tighten bolts/screw - 3 -.
-
Then perform functional check.
2. Washer
-
Qty. 7.
3. Bolt/screw
-
10 Nm.
-
Qty. 7.
4. Cable for emergency release
5. Servo motor
6. Electrical connector
7. Micro switch (convertible top closed)
8. Micro switch (convertible top open)