New Beetle L4-2.0L (AVH) (2005)
Brake Caliper: Overhaul
FS III
FS III front brake calipers, assembly overview
Note:
^
When carrying out repairs install all parts supplied in repair kit. New brake calipers are filled with brake fluid and are pre-bled.
^
Apply a thin coating of assembly lubricant G 052 150 A2 to brake cylinders, pistons and seals.
FS III front brake calipers, assembly overview
1 - Dust cap
2 - Bleeder valve
^
Apply a very thin coating of assembly lubricant G 052 150 A2 to threads before installing
3 - Cap
^
insert into mounting bushing
4 - Guide pins, 28 Nm
5 - Mounting bushing
^
Insert into brake caliper housing
6 - Brake caliper housing
7 - Protective seal
^
Do not damage when inserting piston
8 - Piston
^
Apply a very thin coating of assembly lubricant G 052 150 A2 to piston before inserting
9 - Seal