New Beetle L4-2.0L (AVH) (2005)
-
Using trim removal wedge 3409, insert inner sealing lip into groove in cylinder.
Note:
^
When doing this hold piston in front of caliper housing.
-
Press piston into brake caliper housing using piston resetting tool T10145.
Note:
^
The protective seal outer sealing lip will then locate in the piston groove.
C 38
Rear brake caliper, assembly overview
Note:
^
When carrying out repair install all parts supplied in repair kit.
^
New brake calipers are filled with brake fluid and are pre-bled.
^
Apply a thin coating of assembly lubricant G 052 150 A2 to brake cylinders, pistons and seals.
^
When carrying out repairs it is essential to appropriately pre-bleed the brake calipers (without brake pads) before installing in vehicle.