New Beetle L4-2.0L (AVH) (2005)
^
Do not rotate crankshaft when checking radial clearance
7 - Cylinder block
8 - Connecting rod bearing cap
^
Note installed position
^
Caps only fit in one position and only on appropriate connecting rod due to breaking procedure (cracking) separating cap from connecting rod
9 - Oil spray jet
^
For piston cooling
10 - Pressure relieve valve, 27 Nm
11 - 30 Nm plus 1/4 turn (90°)
^
Replace
^
Oil threads and contact surfaces
^
To measure radial clearance, tighten to 30 Nm, but do not turn further
Checking piston ring gap