New Beetle L4-2.0L (AVH) (2005)
/Page-644008.png)
Special tools, testers and auxiliary items required
^
Feeler gauges
Work sequence
-
Push ring squarely from above down to approx. 15 mm from bottom end of cylinder.
Checking piston ring gap
Special tools, testers and auxiliary items required
^
Feeler gauges
Work sequence
-
Clean groove before check.
Checking piston
Special tools, testers and auxiliary items required
^
External micrometer 75 to 100 mm
Work sequence
-
Measure pistons approx. 10 mm from lower edge of skirt, at 90° to piston pin axis.
