New Beetle L4-2.0L (AVH) (2005)
Sealing Flange, Engine Front: Service and Repair
Assembly Overview
Assembly overview
Engine codes AEG, AVH, AZG, BEV
Engine codes BDC, BGD
Engine codes AEG, AVH, AZG, BEV
1 - 90 Nm plus 1/4 turn (90°)
^
Replace
^
Threads and shoulder must be free of oil and grease
^
Use counterhold 3415 to loosen and tighten
2 - Crankshaft toothed belt pulley
3 - 15 Nm
4 - Seal
^
For crankshaft - belt pulley end
5 - Sealing flange - belt pulley end
^
Must be located on dowel sleeves
^
Remove oil pan in order to remove and install
6 - Cylinder block
7 - 60 Nm plus 1/4 turn (90°)
^
Replace
8 - Flywheel/drive plate
^
To remove and install flywheel counterhold with 3067