New Beetle L4-2.0L (AVH) (2005)
Cable sleeve marking: Yellow
Prerequisites:
-
Central flap lever correctly adjusted See Fig. 1.
-
Heating and ventilation controls are installed.
-
Connecting duct removed.
Adjusting
-
Turn air distribution rotary control knob to left onto stop.
-
Attach center wire of cable -2- to the central flap lever -1-.
-
Press footwell/defrost flap lever onto stop arrow -A- and attach outer cable -2- with clip -3-.
-
Turn air distribution rotary control knob to left and right onto stops.
When turning the rotary control knob both end stops must be reached.