New Beetle L4-2.0L (AVH) (2005)
13. Fuel tank
14. Heat shield
-
For fuel tank
15. Clamping washer
16. Cover for fuel tank
17. 25 Nm
18. Tension strap
-
Note varying lengths
-
Installation position: Locating point (hole) faces direction of travel
19. Fuel filter (vehicles with engine code AEG, AVH, AZG)
-
Installation position: Arrow points in direction of flow
-
Fuel filter with attachments, removing and installing (vehicles with engine code BEV, BGD).
20. Screw clamp
-
Vehicles with engine code AEG, AVH, AZG
-
Note installed position, see below Fig. 4
21. Supply line
-
Black
-
Check for secure fit
-
To remove from fuel filter, press release buttons on connecting piece
Vehicles with engine code AEG, AVH, AZG
-
To fuel supply line at fuel distributor.
Vehicles with engine code BEV
-
To fuel supply line at fuel distributor.
Vehicles with engine code BGD
-
To fuel supply line at fuel distributor.
22. Ventilation line
-
White
-
Clipped in at top of fuel tank
-
Check for secure fit
-
To Evaporative Emission (EVAP) canister purge regulator valve -N80-.
23. Seal
-
Replace if damaged
-
To install, place into opening of fuel tank when dry
-
Only coat with fuel when installing Fuel Pump (FP) flange
24. Fuel Pump (FP) unit
-
Note installation position of flange at fuel tank, see below Fig. 1.
-
Clean strainer if dirty
25. Union nut, 75 Nm
26. Supply line
-
Black
-
Check for secure fit
-
Clipped in sideways at fuel tank
-
To remove from flange and fuel filter, press release buttons on connecting piece
27. Return line
-
Blue or with blue marking
-
Clipped in sideways at fuel tank
-
Check for secure fit
-
To remove from flange, press release buttons on connecting piece
Vehicles with engine code AEG, AVH, AZG
-
From fuel return line at fuel distributor.
Vehicles with engine code BEV, BGD
-
From fuel pressure regulator.
28. Gravity valve
-
To remove, unclip valve upward from connection
-
Check valve for throughput. Valve vertical: open, Valve tilted 45 degrees: closed
29. Pressure retention valve
-
Checking, see below Fig. 3
30. Ground (GND) connection
-
Check for secure fitting
Fig. 1 Installation position of Fuel Pump (FP) flange