New Beetle L4-2.0L (AVH) (2005)
/Page-939005.png)
-
Check wires between test box and 5-pin connector for open circuit according to wiring diagram.
Terminal 1 + socket 40
Terminal 3 + socket 12
Wire resistance: max. 1.5 Ohms
Vehicles with engine code AVH, AZG, BDC, BEV, BGD
-
Check wires between test box and 5-pin connector for open circuit according to wiring diagram.
Terminal 1 + test box socket 26
Terminal 3 + test box socket 27
Wire resistance: max. 1.5 Ohms
Continued for all vehicles
-
Check wires for short circuit to each other, to vehicle Ground (GND) and to B+.
Specified value: Infinite Ohms
-
Erase DTC memory of Engine Control Module (ECM). Diagnostic mode 4: Reset/erase diagnostic data. See: Testing and Inspection/Scan Tool
Testing and Procedures/With Generic Scan Tool/Diagnostic Mode 4: Reset/Erase Diagnostic Data
-
Generate readiness code. See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
If no malfunctions are found in wire:
