volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Checking Fuel Pressure Regulator and Holding Pressure|Page 4964 > < Checking Fuel Pressure Regulator and Holding Pressure|Page 4962
Page 3
background image

-

Pull vacuum hose -1 - off fuel pressure regulator - 2 -.

-

Fuel pressure must increase to approx. 3.0 bar

If the specification is not obtained:

-

Check quantity supplied by fuel pump.

If the specification is obtained:

-

Switch off ignition.

-

Check for leaks and holding pressure by observing pressure drop on gauge.

-

After 10 minutes, there must be a residual pressure of at least 2.0 bar.

If the holding pressure drops below 2 bar:

-

Start engine and run at idling speed.

-

Switch ignition off after pressure has built up. At same time close pressure tester V.A.G1318 shut-off tap (handle at right angles to through-flow
direction - arrow -).

-

Observe pressure drop on gauge.

If the pressure does not drop:

-

Check fuel pump non-return valve.

If the pressure drops again:

Checking Fuel Pressure Regulator and Holding Pressure|Page 4964 > < Checking Fuel Pressure Regulator and Holding Pressure|Page 4962