New Beetle L4-2.0L (AVH) (2005)
/Page-1180007.png)
-
Check pressure gauge for proper seal.
NOTE: Before removing pressure gauge, place cleaning rags again around line connection which is to be disconnected and remove fuse 28 from
fuse holder again.
-
Erase DTC memory of Engine Control Module (ECM). Diagnostic mode 4: Reset/erase diagnostic data. See: Computers and Control
Systems/Testing and Inspection/Scan Tool Testing and Procedures/With Generic Scan Tool/Diagnostic Mode 4: Reset/Erase Diagnostic Data
-
Generate readiness code. See: Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes
Vehicles with engine code BEV, BCD
NOTE:
-
The fuel pressure regulator regulates the fuel pressure to approx. 4 bar.
-
Fuel pressure regulator is located on fuel filter.
Recommended special tools and equipment
-
V.A.G 1318 pressure gauge
-
V.A.G 1318/9 adapter
-
V.A.G 1318/17 adapter
Work sequence
-
Remove cover in front of fuse holder.
