New Beetle L4-2.0L (AVH) (2005)
Vehicle Speed Sensor: Service and Repair
Vehicle Speed Sensor (VSS) (Vehicles With 01 M Transmission), Replacing
Recommended special tools and equipment
-
10-222A Engine support bridge
-
V.A.G 1331 Torque wrench (5 to 50 Nm)
Requirements
-
Selector lever must be in -P- position.
-
Parking brake must be engaged or else daylight driving lights will be switched on.
-
Ignition switched off.
Work procedure
-
Determine whether a coded radio is installed. In this case, determine the anti-theft coding.
-
Switch ignition off and disconnect battery Ground (GND) strap.
-
Remove battery.
-
Remove battery holder.