New Beetle L4-2.0L (AVH) (2005)
/Page-2094009.png)
-
Turn screwdriver - arrow - (for USA: insert Airbag Removal Tool (USA only) JC 1000 ). In this case, clamp - 2 - will be pressed down and the
catch - 3 - of the airbag unit - 4 - will thereby disengage.
-
Turn steering wheel back 180° and disengage second catch on the opposite side.
-
Turn steering wheel - 1 - to center position (wheels in straight-ahead position).
CAUTION: Electrostatic charges may result in involuntary deployment of the airbag. Therefore, the technician must be electrostatically
discharged before disconnecting ignition- and Ground (GND) wires. This is done e.g. by briefly grasping the chassis or door striker.
-
Disconnect harness connector from airbag unit - 4 -.
Installing
