volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Warnings and Safety Measures For Lead-Acid Batteries|Page 7441 > < Warnings and Safety Measures For Lead-Acid Batteries|Page 7439
Page 3
background image

-

VAG 1331 Torque wrench (or equivalent 5 - 50 Nm).

Battery, disconnecting

CAUTION:

Before beginning repairs on the electrical system

-

Obtain anti-theft radio security code.

-

Switch off all electrical consumers.

-

Switch ignition off and remove ignition key.

-

Do not loosen or remove ground strap from body. Disconnect terminal from battery only.

First remove fuse holder on battery.

-

Press locking lugs together -arrow- and fold open cover with fuse holder.

-

Unclip cover with fuse holder from battery insulation enclosure and set aside.

-

Disconnect negative ( - ) battery terminal from battery (tightened to 6 Nm).

-

Disconnect positive ( + ) battery terminal clamp and remove cable (tightened to 6 Nm).

Battery, reconnecting

NOTE:

-

In order to prevent damage to the battery housing, battery terminals must be placed on battery posts without using force (by hand only).

-

Battery posts and terminals must no longer be greased.

-

Reconnect battery in reverse order of disconnecting. Ensure battery terminals are torqued as specified.

-

Perform work steps specified in table.

NOTE:  Refer to appropriate wiring diagram for installed positions of cables to fuses if necessary.

Battery - New Beetle Sedan from 12.02 and New Beetle Convertible from 08.02, disconnecting and reconnecting

Special tools, testers and auxiliary items needed

Warnings and Safety Measures For Lead-Acid Batteries|Page 7441 > < Warnings and Safety Measures For Lead-Acid Batteries|Page 7439