New Beetle L4-2.0L (AVH) (2005)
Wheels: Service and Repair
Wheel centering seat, protecting against corrosion
Valid for light metal alloy and steel wheels
When replacing wheel, wheel centering seat should be waxed with
Wax spray D 322 000 A2
In order to prevent corrosion between wheel centering seat and rim.
-
Remove wheel.
-
Always clean wheel centering seat at wheel hub and centering of rim.
-
Apply wax in area of the centering - arrow - using a brush.
Always make sure that only the centering - arrow - is waxed and not the rim contact surfaces. Consequences of this would be a soiling of the
brakes during vehicle operation and poor braking performance would result.
CAUTION: Wheel bolts, contact surfaces of wheel/wheel hub and threads in wheel hub must not be waxed. Threads of wheel bolts must never be
handled with grease or corrosion protection agents!
-
Install wheel and tighten