New Beetle L4-2.0L (AVH) (2005)
Shift Interlock Cable: Service and Repair
Locking cable, removing and installing, 09G, 6 Spd. A/T
Removing
-
Check whether a coded radio is installed. If so, obtain anti-theft coding.
-
Move selector lever to position "P".
-
With ignition switched off disconnect battery.
-
Remove driver's airbag unit and steering wheel
-
Remove trim on left under instrument panel
-
Remove steering column trim
-
Remove bolts - 1 - from height and reach adjustment handle - 2 -.
-
Turn ignition key to "ignition on" position.
-
Pull out clip - 2 - for locking cable - 3 -.
-
Pull locking cable out of steering lock - 1 -.
-
Remove selector lever handle.
-
Remove center console.
-
Remove bolt on locking cable support mounting - arrow A -.
-
Carefully pull locking cable out of selector mechanism - arrow B - and unhook from locking lever - arrow C -.