New Beetle L4-2.0L (AVH) (2005)
-
Carefully pry up retaining lugs - arrows - (Qty 4).
Note: If the retaining lugs - arrows - are damaged replace the complete cover.
-
Take complete selector mechanism cover off upward.
-
Take printed circuit board off of fixing points on frame - arrows -.
Installing
Note: Ensure when installing the printed circuit board that the contacts are not damaged and that the printed circuit board is not bent.
-
Position printed circuit board on fixing points on frame - arrows -.
-
Reconnect printed circuit board connector - 1 -.
-
Clip connection into hole - arrow - in retainer - 2 -.