New Beetle L4-2.0L (AVH) (2005)
Terminal 1 + socket 47
Terminal 3 + socket 1
Terminal 4 + socket 2
Terminal 5 + socket 22
Terminal 7 + socket 10
Terminal 9 + socket 36
Terminal 8 + socket 21
Wire resistance: max. 1.5 Ohms
Continued for all vehicles
-
Check wires for short circuit to each other.
Specified value: Infinite Ohms
If no malfunctions are found in wires:
Vehicles with 01 M transmission
-
Check adjustment of selector lever cable.
Vehicles with 09G transmission
-
Check adjustment of Multi-Function Transmission Range (TR) switch -F125-. Multi-function switch, replacing.
-
Check adjustment of selector lever cable.
Continued for all vehicles
-
Erase DTC memory of Transmission Control Module (TCM). Diagnostic mode 4: Reset/erase diagnostic data. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/With Generic Scan Tool/Diagnostic
Mode 4: Reset/Erase Diagnostic Data
-
Generate readiness code. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and
Readiness Codes
If no malfunctions are detected in wires and adjustments of selector lever cable and Multi-Function Transmission Range (TR) switch are OK:
-
Replace Multi-Function Transmission Range (TR) switch -F125-. replacing multi-function switch.
-
Erase DTC memory of Transmission Control Module (TCM). Diagnostic mode 4: Reset/erase diagnostic data. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/With Generic Scan Tool/Diagnostic
Mode 4: Reset/Erase Diagnostic Data
-
Generate readiness code. See: Powertrain Management/Computers and Control Systems/Testing and Inspection/Monitors, Trips, Drive Cycles and
Readiness Codes