New Beetle L4-2.0L (AVH) (2005)
-
Connect Multi-Function Transmission Range (TR) switch -F125- (-4-) to shift rod -6-
-
Screw in mounting bolts -5- for multi-function switch hand-tight.
-
Place setting gauge T10173 on shift rod -2-
-
Rotate Multi-Function Transmission Range (TR) Switch -1- until tab on connector engages in groove of adjustment tool.
-
Fasten setting gauge T10173 onto shift rod -2- using bolt -3-.
-
Tighten mounting bolts (arrows) of Multi-Function Transmission Range (TR) switch.
Tightening torque: 6 Nm
-
Remove adjustment tool T10173 from shift rod.
Rest of installation is performed in reverse order of removal.
-
Erase DTC memory of Transmission Control Module (TCM). Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code.