New Beetle L4-2.0L (AVH) (2005)
/Page-1458004.png)
3. Pressure plate
^
Removing and installing go to Fig. 1
^
Check ends of diaphragm spring go to Fig. 2
Note: Pressure plates are protected against corrosion and greased. Only the contact surface may be cleaned, otherwise the service life of the clutch
will be considerably reduced.
4. Bolt
^
Use parts catalog to check correct application
^
On two-part flywheel: 22 Nm (always replace)
^
On single piece flywheel: 20 Nm
^
Loosen and tighten gradually and diagonally
