New Beetle L4-2.0L (AZG) (2003)
-
Unclip clip - 1 - from door handle.
-
Pry off caps - 1 -.
-
Lower door window until securing bolts of door window are accessible.
NOTE: If work step is not possible due to malfunction of the electrical window regulator, window regulator motor can be removed to be able to
slide window down.
-
Loosen bolts - 2 - and press clamping brackets apart.
-
Slide door windows upward and secure (e.g. using adhesive tape).
-
Remove operating lever for front hood lock (drivers side only).
-
Remove lower A-pillar trim
-
Disconnect multi-pin harness connectors - 1 - at A-pillar - 2 -