New Beetle L4-2.0L (AZG) (2003)
-
Reinstall roof frame trim panel
-
Close convertible top, pull down the handle for locking the top, turn the handle counterclockwise as far as the stop, pull the top down and turn
the handle clockwise
-
Push the handle up into the recess
-
Destroy and properly dispose of removed parts, as well as the extra part from the repair kit
Section D
Section D - Additional Repair Information
-
If cable guide -A- needs to be replaced, install new cable guide that came on the new short lower cable, using rivet (1Y0 871 996 B)
-
If cable guide -B- needs to be replaced, install new cable guide that came on the new short lower cable, using rivet (1Y0 871 996 B) and a new
bushing (1Y0 871 180) from the repair kit
NOTE: Most vehicles will not need these cable guides replaced
-
If there is no hole in the frame -arrow- to which cable guide for the long upper cable can be attached, a hole must be drilled