New Beetle L4-2.0L (AZG) (2003)
Door Lock Cylinder: Service and Repair
Lock Cylinder Housing, Removing
-
Carefully pry out plug -1-.
-
Pull door handle and hold. Loosen screw -1- to stop with socket insert T 10011. This releases the lock cylinder housing.
CAUTION!
Loosen screw -1- only, if screw is removed, the door lock must be removed to realign.
-
Pull lock cylinder housing -2- out of door handle bearing bracket at right angles.
NOTE: The lock cylinder housing is released before the screw -1- is removed.