New Beetle L4-2.0L (AZG) (2003)
IMPORTANT: When using the JC 4200 cable guide tool, pull elastic cable to keep tension against clip, otherwise tool will come off retaining
plate
NOTE:
-
Clips on retaining plate must face outwards when inserted
-
When retaining plate and elastic cable are fully inserted, only the string will be visible outside headlining
-
Push clips on retaining plate through holes in headlining
-
Obtain new slider (1Y0 871 341/A or 1Y0 871 342/A) from cable kit
-
Untie only knot -1- in the short lower cable
IMPORTANT:
-
Do not cut knot off new cable
-
Cable length must be maintained