New Beetle L4-2.0L (AZG) (2003)
Oil Filter: Service and Repair
Oil Filter Flange Assembly
Oil filter flange assembly
1. Sealing plug
^
40 Nm (30 ft. lbs.)
2. Seal
^
Cut off seal and replace if leaking
^
Fits firmly on item 1
3. Spring
^
For pressure relief valve, approximately 4 bar (58 psi)
4. Piston
^
For pressure relief valve approximately 4 bar (58 psi)
5. Gasket
^
Always replace
6. Check-valve
^
8 Nm (71 inch lbs.)
7. Seal
^
Install onto sealing cap shoulder (item 8 )
8. Sealing cap
9. Retaining clip
^
Check for tight fit
10. Sealing plug
^
15 Nm (11 ft. lbs.)
^
Cut off seal and replace if leaking
11. 1.4 bar oil pressure switch F1
^
25 Nm (18 ft. lbs.)
^
Black
^
Checking, Refer to Oil Pressure, Testing and Inspection
12. Oil filter flange
^
With 4 bar (58 psi) relief valve