New Beetle L4-2.0L (AZG) (2003)
Oil Pan: Service and Repair
Oil pan, removing and installing
Special tools and equipment
^
3185 Extension socket wrench, or equivalent
^
3249 Hex ball socket
^
VAG1331 Torque wrench 5 to 50 Nm (3 7 to 37 ft. lbs.), or equivalent
^
D 176 404 A2 Silicone sealant (not shown)
^
Hand drill with plastic brush (not shown)
^
Flat scraper (not shown)
^
Protective glasses (not shown)
Removing
-
Remove lower insulation tray.
-
Drain engine oil.
Note: Observe oil disposal regulations!
-
Remove oil pan bolts using 3185 extension socket wrench. Remove bolts to bell housing using 3249 socket.
-
Remove oil pan. If necessary, tap lightly with a rubber hammer.
-
Remove sealant residue on engine block with a flat scraper.