New Beetle L4-2.0L (AZG) (2003)
-
Install camshaft sprocket and tighten by counterholding sprocket using 3415 counter-hold. (Remove bolts from holes -arrows- before using tool. )
^
Tightening torque: 100 Nm (74 ft. lbs.)
Note:
^
When the camshaft is turned, the crankshaft must not be at TDC. If so, there is a danger of damage to the valves or piston crowns.
^
The rest of the assembly is basically a reverse of the disassembly sequence.
^
Installing toothed belt and adjusting timing.