New Beetle L4-2.0L (AZG) (2003)
-
Install 10-222A support with legs 1 0-222A/8 as shown.
-
Remove bolts -arrows- and engine mount -1- as follows:
-
Unscrew bolts -arrows- Loosen bolt -arrow A
-
Remove vibration damper/belt pulley.
-
Remove camshaft drive belt guard center and lower sections.
-
Remove bolts for engine bracket from cylinder block -arrows-.
Note: To loosen front screw from bracket, raise engine slightly using the support bracket.
-
Mark direction of rotation on belt.
-
Release belt tension and take off belt.
-
Turn crankshaft back slightly.