New Beetle L4-2.0L (AZG) (2003)
Marker Lamp Bulb: Service and Repair
Front Side Marker Light Bulb (Turbo S), Replacing
Front Side Marker Light Bulb (Turbo S models only), Replacing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove front inner fender liner.
-
Turn bulb holder in direction of -arrow- and pull out from housing.
-
Pull out bulb, do not turn.
Installing
CAUTION: Do not touch the glass portion of the bulb with bare hands. The moisture and/or grease from fingers that evaporates on the bulb during
operation, can cause the glass to cloud over.
-
Install in reverse order of removal.
NOTE: When installing, ensure bulb holder engages fully in housing, and turn in opposite direction of removal.