New Beetle L4-2.0L (AZG) (2003)
-
Install dust cap -arrow- hand-tight in oil filter housing.
Replacing oil filter (Diesel engines)
Removing
Note:
Observe waste disposal regulations! Oil new O-rings before installation.
-
Loosen sealing cap -arrow- e.g. using ring wrench AF 36 or using socket insert AF 36 T10125.
Note:
Loosen cap before draining/extracting so that engine oil can flow out of filter housing.
-
Clean sealing surfaces at cap and at oil filter housing.
Installing
-
Install oil filter -3-
-
Replace O-rings -2 and 4-.