New Beetle L4-2.0L (AZG) (2003)
Fuel Tank: Service and Repair
Fuel Tank Removal and Installation
Fuel Tank Components, Removing and Installing
Fuel tank components, removing and installing
1. Sealing cap
^
secured with strap from MY 2000
2. Seal
^
Replace if damaged
3. Mounting screw
^
1 Nm (9 inch lbs.)
4. Tank flap unit
^
With rubber cup
5. Vent pipe Black
^
Check for tight fit
6. Ground wire
^
Check for tight fit
7. Vent line
^
White
^
Check for tight fit
^
To Evaporative emissions (EVAP) cannister, Refer to Evap (item 5 )
^
Press release tabs on connector to remove from flange
8. Gravity/overflow valve
^
Removing: unclip upward out of support
^
Check valve for flow:
^
Valve vertical: OPEN
^
Valve tilted 45°: CLOSED
9. O-ring
^
Replace if damaged
10. Change-over valve