New Beetle L4-2.0L (AZG) (2003)
-
Secure airbag to brace - 3 - (must be replaced when airbag deployed).
-
Install cover - 5 -.
-
Insert cover flush to instrument panel.
CAUTION: Make sure no one is in the vehicle.
-
Close doors.
-
Connect battery ground (GND) strap
-
Switch ignition on after installing all components.
NOTE:
-
After connecting battery, vehicle options (radio, clock, electric window regulator) must be checked according to repair manual and/or user
manual.
-
If voltage of Electronic Control Module (ECM) is too low with ignition switched on, DTC memory and readiness code must be checked