Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


New Beetle L4-2.0L (AZG) (2003)

Sensors and Switches > Sensors and Switches - Body and Frame > Convertible Top Switch > Component Information > Technical Service Bulletins > All Other Service Bulletins for Convertible Top Switch: > VG-CAN > Jun > 04 > Campaign - Window Clamp Bolts/Convertible Top Button > Page 658

Page 12
background image

-

Unclip roof frame trim panel -1- by prying off rear clips -3- then front clips -2-
-

Turn handle 90° and remove roof frame trim panel over handle

NOTE:
-

DO NOT remove handle -4-

-

It is shown removed for illustrative purposes only

IMPORTANT:  Before disassembly, look closely at position of button against the adjuster Make note of button angle and position because it
is the position needed for new button installation Button is under slight spring tension

-

Remove circlip -5-

-

Remove pin -6- and PRESS button -7-

IMPORTANT:
-

When removing button, two rubber washers -8- and adjuster -9- also come off

-

Rubber washers will need to be reinstalled with new adjuster and button

-

Illustration showing the disassembled individual parts:
5

-

Clip (new from repair kit)

6

-

Pin (new from repair kit)

7

-

Button (new from repair kit)

8

-

Rubber washers (reinstall parts)

9

-

Adjuster (new from repair kit)

Sensors and Switches > Sensors and Switches - Body and Frame > Convertible Top Switch > Component Information > Technical Service Bulletins > All Other Service Bulletins for Convertible Top Switch: > VG-CAN > Jun > 04 > Campaign - Window Clamp Bolts/Convertible Top Button > Page 658

[PREV PAGE] [NEXT PAGE]