Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


New Beetle L4-2.0L (AZG) (2003)

Sensors and Switches > Sensors and Switches - Body and Frame > Convertible Top Switch > Component Information > Technical Service Bulletins > Recalls: > VG-US > Jun > 04 > Campaign - Convertible Top Button/Window Clamp Bolt > Page 532

Page 7
background image

-

Remove rubber grommets from holes -1- in the door inner panel

NOTE:  Rubber grommet and hole at front position is smaller than rubber grommet and hole at rear

-

Raise or lower window position -4- so the bolts -2- and -3- are visible through holes -1-

-

Ensure that ignition switch is in the "OFF" position

-

Open hood and disconnect ground (GND) cable from battery

-

On door trim panel, unclip cable guide -1- using the flat blade of a screwdriver -2-, pull cable out of retainer -3- in direction of arrow and unhook
cable hook -4-
-

Disconnect electrical connectors to window switch, light, etc. and set door trim panel aside

Sensors and Switches > Sensors and Switches - Body and Frame > Convertible Top Switch > Component Information > Technical Service Bulletins > Recalls: > VG-US > Jun > 04 > Campaign - Convertible Top Button/Window Clamp Bolt > Page 532

[PREV PAGE] [NEXT PAGE]