Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


New Beetle L4-2.0L (AZG) (2003)

Sensors and Switches > Sensors and Switches - Body and Frame > Convertible Top Switch > Component Information > Technical Service Bulletins > Recalls: > VG-US > Jun > 04 > Campaign - Convertible Top Button/Window Clamp Bolt > Page 537

Page 12
background image

-

Unclip roof frame trim panel -1- by prying off rear clips -3- then front clips -2-
-

Turn handle 90° and remove roof frame trim panel over handle

NOTE:
-

DO NOT remove handle -4-

-

It is shown removed for illustrative purposes only

IMPORTANT:
-

Before disassembly, look closely at position of button against the adjuster

-

Make note of button angle and position because it is the position needed for new button installation Button is under slight spring tension

-

Remove circlip -5-

-

Remove pin -6- and PRESS button -7-

IMPORTANT:
-

When removing button, two rubber washers -8- and adjuster -9- also come off

-

Rubber washers will need to be reinstalled with new adjuster and button

-

Illustration showing the disassembled individual parts:
5

-

Clip (new from repair kit)

6

-

Pin (new from repair kit)

7

-

Button (new from repair kit)

8

-

Rubber washers (reinstall parts)

9

-

Adjuster (new from repair kit)

Sensors and Switches > Sensors and Switches - Body and Frame > Convertible Top Switch > Component Information > Technical Service Bulletins > Recalls: > VG-US > Jun > 04 > Campaign - Convertible Top Button/Window Clamp Bolt > Page 537

[PREV PAGE] [NEXT PAGE]