New Beetle L4-2.0L (AZG) (2003)
NOTE: If cable guide -B- is being removed, a bushing will also come off
-
Move headlining aside and remove rivet -arrow- attaching cable guide (with bushing) or elastic strap to the frame
NOTE: If there is no cable guide, elastic strap or hole in the frame, to which cable guide can be attached, see Additional Repair Information in
Section D for instructions to drill hole
IMPORTANT: Make note of cable guide position and complete cable routing for installation of new cable and cable guide
NOTE: Illustration shows rivet and cable guide as seen from inside the vehicle
-
On some vehicles, remove long upper cable with cable guide through fabric loops arrows-
NOTE: Fabric loops are not on all vehicles
-
Remove slider -1- from retaining plate -2- (inside headlining) by starting at bottom -arrow- and prying away from clips -3-
NOTE:
-
Retaining plate inside headlining is attached to an elastic cable that is under tension
-
Illustration shows an upper cable attached to the slider
-
Some vehicles may have an elastic strap and no cable
-
Remove slider with cable(s) or elastic strap from vehicle