Volkswagen Workshop Manuals
New Beetle L4-2.0L (AZG) (2003)
Sensors and Switches > Sensors and Switches - Body and Frame > Door Lock Cylinder Switch > Component Information > Technical Service Bulletins > Body - Door Lock Rotary Switch Diagnostic Aid > Page 798
After rotary position has been verified:
Check coding of comfort module.
After coding of comfort module has been verified:
Check wiring between door control module and lock before replacing any components.
To Check Door Ajar Switch (all vehicles):
Roll windows down and close all doors.
Open Door, instrument cluster should display open door.
Manually position door latch to closed position
Wait for instrument cluster open door display to turn OFF.
Move door back and forth and observe the open door display in instrument cluster.
The state of the door ajar should not change while performing this test.
If the state of the door ajar does change:
Verify mechanical adjustments and check wiring between door control module and lock before replacing any components.
Required Parts and Tools
No Special Parts required.
No Special Tools required.
All part and service references provided in this Technical Bulletin are subject to change and/or removal.
Always check with your Parts Dept. and Repair Manuals for the latest information.
|[PREV PAGE] [NEXT PAGE]|