New Beetle L4-2.0L (AZG) (2003)
-
Remove noise insulation panel -arrows-.
-
Remove left noise insulation -arrows-.
Vehicles with TDI engine
-
Remove intake air duct between charge air cooler and turbocharger.
Continued for all vehicles
-
Loosen belt pulley socket-head bolt.
Counter-hold using hex wrench if necessary.
-
Turn tensioning device in direction of arrow to relieve tension on ribbed belt.
-
Mark direction of travel of ribbed belt mark direction before removing the ribbed belt. Reinstalling a used belt in the opposite direction could
damage the belt.
-
When installing the belt, make sure that it is correctly seated in the pulleys.
-
Remove ribbed belt.