New Beetle L4-2.0L (AZG) (2003)
12. Ribbed belt tensioner
Vehicles With Pump In Upper Section
Power steering pump in upper section, assembly overview
Vehicles with power steering pump in upper section
1. Bracket
2. Hex. bolt
^
25 Nm (18 ft. lbs.)
3. Power steering pump
^
Before installing fill with oil
4. Seals
^
Always replace
5. Pressure hose
6. Banjo bolt
^
38 Nm (28 ft. lbs.)
7. Suction hose
8. Belt pulley
9. Socket-head bolt
^
25 Nm (18 ft. lbs.)
10. Ribbed belt
^
Mark the direction of travel using a crayon or marker before removing the ribbed belt. Reinstalling a used belt in the opposite direction could
damage the belt.
^
When installing the belt, make sure that it is correctly seated in the pulleys.
^
Determine parts number from Parts Supplier
^
Removing and belt routing, Refer to Engine, Drive belt, Service and Repair
^
Checking condition
-
Maintenance Manual; Checking condition of ribbed belts
11. Ribbed belt tensioner