New Beetle L4-2.0L (AZG) (2003)
WARNING:
Place transmission jack VAG 1383/A underneath (danger of accident from falling parts when pulling out the wheel hub and the wheel bearing).
Pulling out hub
-
Insert thrust bolts -1- in wheel bearing housing.
-
Install support -2-, hollow piston cylinder -3- with pull rod and special nut -4-.
-
Hold appliance firmly and pull wheel hub out.
1. Thrust bolt E-15
2. Support E-40
3. Hollow piston cylinder HKZ-15
4. Special nut E-8-214 and pull rod
5. High pressure hose with quick release coupling
Pulling out wheel bearing
-
Remove circlip.
-
Set up thrust piece -1- with collar facing wheel bearing, press sleeve -2- with four internal stepped diameters towards wheel bearing housing and
hollow piston cylinder -3- with pull rod and special nut -4-.
-
Operate pump and pull out the wheel bearing.
1. Thrust piece E-5
2. Press sleeve E-65-1
3. Hollow piston cylinder HKZ-15
4. Special nut E-8-214 and pull rod