New Beetle L4-2.0L (AZG) (2003)
^
Block supply hose -A- which leads to brake fluid reservoir with clamp 3094.
^
Using a screwdriver -1-, fully remove clutch master cylinder in direction of arrow and remove clip-B- which secures the pipe/hose.
^
Separate pipe/hose assembly -C- from clutch master cylinder and seal openings.
Installing
Installation is carried out in the reverse sequence. When installing note the following:
^
Fit pipe/hose assembly -C- into clutch master cylinder.
^
Fully engage retaining clip -B- into master cylinder -arrow-.
^
Fit pipe/hose assembly into support on bodywork.
^
Fit pipe/hose assembly -B- fully into clutch slave cylinder.
^
Install clip-A-.
^
Press pipe/hose assembly housing -C- in transmission.