New Beetle L4-2.0L (AZG) (2003)
/Page-854004.png)
^
Unlocking tool 3309
^
10-208 A Pliers
Removing
^
Check whether a coded radio is fitted. If so, obtain anti-theft coding.
^
With ignition switched off disconnect battery Ground strap.
^
Remove cover in driver's footwell.
^
Remove overcenter spring.
^
Remove clutch pedal from clutch master cylinder and press operating rod until it reaches engine compartment.
^
Remove nut-A-.
^
Remove screw, until clutch pedal can be taken out.
Installing
Installation is carried out in the reverse sequence, when doing this note the following:
^
Install overcenter spring .
