New Beetle L4-2.0L (AZG) (2003)
-
Place thrust piece 40-105 on differential housing.
Fig. 10 Installation position of final drive gear
The circular groove -A- faces toward bolt-on side of differential.
Fig. 11 Heating final drive gear to approx. 100°C (212°F) and installing
Use bolts -A- from repair kit to guide final drive gear into position during installation.
Fig. 12 Bolting final drive gear and differential housing together
Use special bolts with plates and nuts as specified in the parts catalog.
Fig. 13 Removing and installing differential pinion shaft spring pin