New Beetle L4-2.0L (AZG) (2003)
^
Spread a small quantity of polyurea grease on pins -arrows- of gear shift lever -1- and the relay lever -2-.
Note: Always replace securing clips -3- and -4- after disassembling
^
Secure gear selector cable with securing clip -3- and gate selector cable with securing clip -4-.
^
Adjust selector mechanism, Refer to Shift Linkage, Adjustments
Tightening torques
Shift housing to body ................................................................................................................................................................................ 25 Nm
Cross support to body ............................................................................................................................................................................... 25 Nm
Selector cable support bracket to transmission ...................................................................................................................................................... 25 Nm