New Beetle L4-2.0L (BEV) (2004)
Lock Carrier: Procedures
Lock Carrier, Moving to Service Position
Lock carrier, moving to service position
-
Removing front part, refer to Front end, assembly overview See: Service and Repair/Body, Front/Front End, Assembly Overview
-
Unhook Bowden cable at lock.
-
Remove bolt -2- from each longitudinal member and install guide pins 3411 into this position on the left and right-hand longitudinal members.
-
Remove bolts -1- and -3- on left and right-hand sides and pull lock carrier in area of guide rails 3411 forward.
Lock Carrier, Service Position
Lock carrier, service position
-
Remove front part.