New Beetle L4-2.0L (BEV) (2004)
/Page-1274001.png)
Vacuum Brake Booster: Testing and Inspection
ABS/EDL/ASR/ESP ABS Mark 60 Vehicles From M.Y. 10.00
Vacuum Pump, Electrical Check & Test Steps Overview
Brake system vacuum pump -V192-, vehicles from m.y. 06.02, electrical check
^
VAG 1526 B Hand multimeter
^
VAG. 1598/31 Adapter set
Requirements
^ Fuse 51 must be OK (remove fuse from fuse holder to check).
-
Remove the 6 - pole contact.
Multi-pin connector with contact assignment
Note: All contacts not listed are currently not assigned and must never be connected to other components!
Contact assignment of connectors for voltage supply and diagnosis.
Contact 1 = Ground
Contact 2 = Connection with engine control module (pin 22)
Contact 3 = Not applicable
Contact 4 = Not applicable
Contact 5 = Voltage supply from Battery + through fuse 51
