New Beetle L4-2.0L (BEV) (2004)
/Page-533002.png)
^
To shaped hose for cylinder head cover or intake hose
Engines codes BDC, BGD
1. 8 Nm
^
Observe different lengths of securing bolts
2. Throttle valve control module -J338
3. Seal
^
Replace if damaged
4. Pressure relief valve
^
Protects intake manifold from damage caused by excess pressures
5. Vacuum hose
^
From PCV heating element -N7924-15 -> item - 10 -
6. Shaped hose
^
From PCV heating element -N79- or cylinder head cover
7. 5 Nm
8. Intake manifold upper part
9. Spreader rivet
10. Vacuum hose
11. To vacuum positioning element
^
On underside of intake manifold upper part
12. To T-piece
13. Intake manifold change-over valve -N156-
14. 8 Nm
15. Rubber bushing
16. Warm air collector plate
^
With intake manifold support
^
With mounting for combi-valve
17. To Leak Detection Pump (LDP) -V144-
18. To brake servo
