New Beetle L4-2.0L (BEV) (2004)
/Page-624003.png)
11. 25 Nm
12. Retainer
13. Oxygen Sensor (02S) Behind Three Way
^
Catalytic Converter (TWO) -G130-*, 50 Nm
^
Grease only threads with hot bolt paste G 052 112 A3. Paste must not get into slots on sensor body
^
Remove and install with 3337
14. 4-pin connector
^ Brown
^
Contacts 3 and 4 are gold plated
^
For oxygen and oxygen sensor heating
15. Front exhaust pipe with catalytic converter
^
With anti-vibration element
16. 10 Nm
17. To center muffler
18. Heat shield
^
For catalytic converter
19. 5 Nm
20. Speed nut
^
Install from rear and press forward onto limit stop
21. 25 Nm
^
Replace
22. Seal
^
Replace
23. Exhaust manifold
24. Seal
^
Replace
